Daheng Glue machine mainly uses a patented piston or gear pump technology, according to the ratio of glue, glue viscosity, glue filling, filling plastic precision or production process of matching the corresponding Glue systems. Workflow: A, B, respectively, into the plastic A, B barrel -A, B pumps were pumping glue Glue - double valve mixing tube uniform mixing glue - within the product on a three-axis platform, industry status Glue glue injection : - Due to the presence of most of the glue smell, difficult to clean, resulting in a serious loss of workers. - Stir-component glue required, artificial irrigation plastic, fitted with plastic is difficult to control the amount of mixing, could easily lead to a waste of glue, defective more. - Glue slow, labor efficiency is too low. - Glue equipment available on the market in general can not be high-precision filling packing, high viscosity, high proportion of glue. 2. Glue system features: - Each of the amount of glue Glue head can reach 1-15 g / s, the number of steps by changing the motor to adjust the amount of plastic irrigation, and with suction function (to avoid leakage of glue, drawing) . - With plastic, plastic irrigation integration, a machine to achieve two functions. - With plastic ratio can be adjusted to only need to operate on the touch screen, ready to use at any time with on-demand ratio, saving glue. - Depending on the performance of glue, plastic buckets optional stirring device (to prevent precipitation), a heating device (increase liquidity glue), vacuum devices (automatic extraction material, anti-foaming), liquid level sensor switch. - Easy to clean, AB glue mixing portion only a plastic mouth mixing tube, so cleaning part only mixing tube, the other parts are not clean. - Plastic volume control precision: All key components are imported components, ensuring high-speed, precision while meeting the requirements of high reliability in automated production conditions, with a unique control system is not affected by pressure and other factors, to avoid the glue does not uniform, Epoxy, drawing, flash and so on. 3, three-axis motion platform features: - Simple operation: Touch screen operation (Chinese interface, the parameters of the record, display, alarm); worker training is simple, saving training time and training costs; - procedures to adjust quickly: editing program easy to learn , can store from 25 to 999 or more work-track pattern, only a simple selection operation, can quickly adapt to different workpiece; The system can automatically order the direction of reforming, auto-repeat path detection, automatic chamfered, smoothing. - Download easy: The machine can be used teach programming, computer, or U disk three ways to download the program directly reads AutoCAD files, with import and export editing functions to facilitate your operations, saving you valuable time. - Machinery easy to adjust: walking speed three-axis machine is X, Y, Z axis 0--200mm / s can be adjusted to accommodate the requirements of different workpiece dimensions within a certain range, and can ensure that the mixing tube to replace the needle when not need to be re-trajectory correction; mechanical structures in three directions can be adjusted. - Versatility, optional 2, 4 to 10 dispensing head, raise Glue speed; widely used in various fluids, a variety of industries, all kinds of graphics. Applicable industries: Suitable for LED, modules, light bar, soft light, display, flasher, ignition, rear axle, coil, relays, sensors, capacitors, power supplies, generators, transformers, crafts, picture frames , PCB board, and other industries. Suitable process: potting potting, dispensing dispensing, mixing glue with glue apply glue: epoxy PU glue, AB glue, polyurethane, silicone, Crystal (especially suitable for two-component glue filler)